Giovanni59
Member
I have searched and could not find much help on my set up issues so I created this new post.
First issue is when camera is mounted the rubber eye cup hits the gimbal when tilting down. I have searched and read conflicting solutions. One is to remove the cup and the other claims if you remove the cup it will throw the balance off and therefore the vertical post has shifted and must be loosened by the two screws and slide it down so the camera clears when tilting. I opted for the second option since lowering that part does not effect the balance of the gimbal.
The second issue (so far) is once the camera is mounted it is not balanced. I was under the impression, and the instructions confirm this, that the gimbal comes pre balanced for the GH4 and the Olympus 12mm lens of which I have. Taking the lens cap off does not improve anything.
So, am I too adjust the horizontal bar and balance it myself? It seems the tilt balance is good.
Please if there is anyone who uses Zenmuse please help. I am surprised there is not more info on the forums about these issues, I thought Zenmuse was very popular.
Thanks
First issue is when camera is mounted the rubber eye cup hits the gimbal when tilting down. I have searched and read conflicting solutions. One is to remove the cup and the other claims if you remove the cup it will throw the balance off and therefore the vertical post has shifted and must be loosened by the two screws and slide it down so the camera clears when tilting. I opted for the second option since lowering that part does not effect the balance of the gimbal.
The second issue (so far) is once the camera is mounted it is not balanced. I was under the impression, and the instructions confirm this, that the gimbal comes pre balanced for the GH4 and the Olympus 12mm lens of which I have. Taking the lens cap off does not improve anything.
So, am I too adjust the horizontal bar and balance it myself? It seems the tilt balance is good.
Please if there is anyone who uses Zenmuse please help. I am surprised there is not more info on the forums about these issues, I thought Zenmuse was very popular.
Thanks