WKM and JR 11x problems

[ZackBasil]

Maybe it's such a dumb problem, but I can't resolve it for a long time.

I have a pretty tuned model on my JR 11x. It works fine with settings for Control Mode Switch, POI and stick calibration.

So, I'm entering the COPY/ERASE menu in 11x, copying this model to another slot. Then choosing the copy one model from a new slot. [restarting the Tx]

Turning on WKM, connecting to PC and.. nothing. CMS is holding on a Fail-safe and gives no reacts on Sub trim. and Travel Adj. Sticks give me absolutely no reaction on a calibration. WTF?

May reboot Tx/WKM/Assistant a lot of times - no change.

Finally changing a model to original one [reboot Tx/WKM]. Woaala. Everything fine again.


What do I do wrong?

Help me pls! I've spent a week for such a deadlock.

 

[kloner]

your radio has something called model match. when you make a new model like you did, it has to be rebound with the bind plug and binding procedure. make sure the failsafes are set when you do it.

 

[ZackBasil]

your radio has something called model match. when you make a new model like you did, it has to be rebound with the bind plug and binding procedure. make sure the failsafes are set when you do it.

Thanks a lot! Everything fine.

 

[Simon Templar]

Whew!! You scared me for a minute.

I am seriously considering the purchase of a JR 11x Zero (as soon as I can find one with the right bundle and the right price) and thought perhaps I was about to make a mistake.





....sT