What is the name of this connector

[Macsgrafs]

My DX201 lead has a snapped wire & I need to get a new connector for it, does anyone know the name of this connector (white 4 pin)?
Its a tiny little chappy, far smaller than lipo charging connectors!!!!
http://www.rangevideo.com/index.php?main_page=product_info&cPath=7_32&products_id=165

 

[ChrisViperM]

Looks like a 4 Pin Molex Connector:

http://www.nghobbies.com/cart/index...id=710&zenid=8c1a1366e21345c06690386d51a24ba8

Chris

 

[mailman35]

or just hack a balance connector off a crap 3s lipo.

 

[Macsgrafs]

Thanks Chris, that's the one....shame they are out of stock

mailman....the balance connector is about twice the size of this tiny connector, hence why I said far smaller than abalance lead from a lipo!

Ross

 

[ZAxis]

Ross

RS supply them http://uk.rs-online.com/web/p/connector-hoods-shells/2799162/

You will also need the crimp terminals http://uk.rs-online.com/web/p/crimp-terminals/6706423/?origin=PSF_346106|acc which are rather small and a pain to connect. I have used fine needle nose pliers to do so with some success. I also solder the joint just to make sure.

Farnell alternative..
http://uk.farnell.com/molex/50125-8000/terminal-male-1-25mm-awg26-28/dp/1756745

http://uk.farnell.com/molex/51021-0...g-4way-1-25mm/dp/9733116?Ntt=molex+51021-0400

andy

 

[ChrisViperM]

You can still try this site: http://www.molex.com/molex/products/group?key=wire_to_board_connectors&channel=PRODUCTS and dig your way through....

Chris (good luck...)

 

[ZAxis]

Ross

Farnell also supply ready crimped leads

http://uk.farnell.com/molex/06-66-0.../dp/1125276?in_merch=true&MER=i-9b10-00001460


andy

 

[Droider]

Ross

Farnell also supply ready crimped leads

http://uk.farnell.com/molex/06-66-0.../dp/1125276?in_merch=true&MER=i-9b10-00001460


andy

Thats why I love this forum... Nice one Andy.... OBTW whats the part number of a 20x6x10mm heat sink? ;-)

Dave

 

[Macsgrafs]

Superb info Andy & my many thanks for your time & effort in sourcing these parts. You have gone above & beyond the call of duty in this one, cheers mate, very much appreciated....just wished I'd read down abit further to the ones with leads already attached never mind, ordered them now.

Ross

 

[Gary Seven]

Thats why I love this forum... Nice one Andy.... OBTW whats the part number of a 20x6x10mm heat sink? ;-)

Dave

Ross

Farnell also supply ready crimped leads

http://uk.farnell.com/molex/06-66-0.../dp/1125276?in_merch=true&MER=i-9b10-00001460

andy

This thread is my "Find 'O The Month." Hats off to [MENTION=289]ZAxis[/MENTION]; and [MENTION=59]Droider[/MENTION]; for such useful information. Never heard of uk.farnell.com until today, plus learned where to get hard-to-find connectors. Thank you all!