Warning a2 spectrum users - do not do the v2 upgrade

[Droider]

DO NOT UPGRADE THE SYSTEM TO BETA 2.0

You it will wipe your bind and you will not be able to rebind.

AND YOU CANT ROLL BACK

AND WHEN YOU GO TO DJI RE[ORT A PROBLEM PAGE THERE IS NO A2 PRODUCT LISTED!

A VERY VERY DISAPPOINTED DJI ADVOCATE. BUT THIS A2 IS NOT WORTH THE MITHER

I now have two useless A2 controller that I cannot even report the issues to DJI though there site!

Dave

 

[soler]

DO NOT UPGRADE THE SYSTEM TO BETA 2.0

You it will wipe your bind and you will not be able to rebind.

AND YOU CANT ROLL BACK

AND WHEN YOU GO TO DJI RE[ORT A PROBLEM PAGE THERE IS NO A2 PRODUCT LISTED!

A VERY VERY DISAPPOINTED DJI ADVOCATE. BUT THIS A2 IS NOT WORTH THE MITHER

I now have two useless A2 controller that I cannot even report the issues to DJI though there site!

Dave

Just report it under the Ace1 section, they replied after about 24 hrs

 

[Droider]

Just report it under the Ace1 section, they replied after about 24 hrs

SO...... what did thay say? Anything useful

 

[soler]

Sorry, it was about a different matter, due to the old DJI assistant app for the iPhone which they pulled the day later

 

[flyonix]

DO NOT UPGRADE THE SYSTEM TO BETA 2.0

You it will wipe your bind and you will not be able to rebind.

AND YOU CANT ROLL BACK

AND WHEN YOU GO TO DJI RE[ORT A PROBLEM PAGE THERE IS NO A2 PRODUCT LISTED!

A VERY VERY DISAPPOINTED DJI ADVOCATE. BUT THIS A2 IS NOT WORTH THE MITHER

I now have two useless A2 controller that I cannot even report the issues to DJI though there site!

Dave

We did the A2 upgrade to the 2.0 Beta, and have not had any troubles binding the DSM2 to the A2, we had to change the settings under the 'Frame rate' on the DX10 from DSMX to DSM2. then it bound straight away.

Also we found that a DSMX satellite does not work with A2, we had to put a DSM2 satellite on the A2

 

[mbsteed]

The DSMX issue should have been known and documented - poor testing or communication, DJI must have known that. ...you would think.

 

[Droider]

We did the A2 upgrade to the 2.0 Beta, and have not had any troubles binding the DSM2 to the A2, we had to change the settings under the 'Frame rate' on the DX10 from DSMX to DSM2. then it bound straight away.

Also we found that a DSMX satellite does not work with A2, we had to put a DSM2 satellite on the A2

I used DSMX nd it worked after the 1.1 receiver update. It was only after updating to 2.0 that it would not and will not bind. Did you always use DSM2 or only with the 2.0 beta upgrade?

I still have not heard anything from DJI.

 

[Droider]

Has anyone got the A2 V2 firmware to bind to Spektrum satellites?