phaseshift
New Member
Hello everyone, I am looking for a way to control a RC tank. I only need 2 outputs for the motors but I would like an option to mix them together for forward and reverse. I also in the future will be installing servos and such for the elevation, barrel recoil, and turret rotation. My questions are:
1. Is it possible to turn off the gyros completely?
2. Could I mix two channels to operate in sync (both tracks forward, or both reverse)
Right now I have a tank with brushless motors and steel gearboxes (man does it fly) that I take to the track to play with. It is controlled using a pistol radio where I have got pretty good at controlling the throttle and steering at the same time to work the ESCs in tandem. My goal is to switch to a control board that can add a few features I have been looking for like the mixing and the ability to control multiple outputs.
Does this sound like something I should be looking into, or should I be looking at airplane mixers? Thank you all for your time.
1. Is it possible to turn off the gyros completely?
2. Could I mix two channels to operate in sync (both tracks forward, or both reverse)
Right now I have a tank with brushless motors and steel gearboxes (man does it fly) that I take to the track to play with. It is controlled using a pistol radio where I have got pretty good at controlling the throttle and steering at the same time to work the ESCs in tandem. My goal is to switch to a control board that can add a few features I have been looking for like the mixing and the ability to control multiple outputs.
Does this sound like something I should be looking into, or should I be looking at airplane mixers? Thank you all for your time.