Strange pulsing of power.

[BorisS]

Just a quick test CS 2217/20 axis and the Herk ESC, not experiencing the power surges with this setup. Its going up and down although in alt hold since the baro sensor doesn't like my heating pumping warm air in the room and i am not going to fly it manual in the room

Musst add though that i have FW off at the moment, 18 DEG firmware on and 11 x 5 graupners

Boris

 

[redridinghood]

Glad to see Andreas Baier involved in this. I am sure some tweaks in the firmware will make the DJI-Herkules combo flying nice.

 

[Kilby]

So did anyone ever come up with an answer for this problem? It's been a little while, but I have some reasons for revisiting it. My problem seemed to only occur when I had 11x4.7 APC props on. My easy solution was to go back to the 10x4.7 APC's. Now that I'm bringing my payload up a bit, I have a need to go back to the 11's, but don't want to risk hitting this issue again. The strange thing for me was that the problem didn't start the second I put the new props on. I had several flights (and TONS of photos) under my belt before it manifested, but then vanished as soon as I went back to 10's.

Any insight would be appreciated. I've got a few things I need to go shoot soon, but don't have time to chase down a lot of issues before hand.

-Terry