You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
SPEKTRUM AR7100R or AR8000
- Thread starter AlienNet
- Start date
If you want to potentially use the RTH functionality if the craft looses its RC signal, then read this to make sure your select the correct RX. HTH
http://www.rcheliaddict.co.uk/spekt...-spektrum-binding-method-preset-failsafe.html
http://www.rcheliaddict.co.uk/spekt...-spektrum-binding-method-preset-failsafe.html
No probs. It took me a while to find that out, but it was worth it. It's kicked in many a time and saved my quad!!Hi Buckers, thats some very interesting & useful info: it dont list my AR7100R so i think that i will use my AR8000 as i have one working fine on my DJi 550, Many Tnx:
just carried out this process on both ar8000 and ar7000 (with Batt/Data on label) and it works Great, Thanks again Buckers i am sure this will save many members a headache or two..
No probs. I have just learned that it can be done with other receivers too, that don't support the preset failsafe function, but to do it, you have to reprogram your TX into heli model, instead of an aero model, to give it the added Aux1 (pitch) function, which it what is used to drive the failsafe. I'm sticking with what I have at present!!
Easiest thing is to try it, by setting it up with the preset failsafe method (if you can), then just test it with the naza assistant software.i have a brand new Spektrum AR7100R i was for selling or P/E for a AR7000 because i reckoned it would not work with Naza RTH, My Tranny is a DX7s, in Heli Mode, do you think that it would work ??