Some doubts

[periquira]

I am starting with Naza and I have 3 doubts:

1 - Can I use a separated 3s lipo to power naza and another to power my engines?
If yes, what is the correct sequence to turn on?

2 - What is the correct timing to use on Turnigy Plush 60A esc?

3 - How can I activate RTH with a switch? (without turning off the radio)
I am configuring this way: 3 position switch that selects one mode between gps atti, atti, manual. And another switch mixed with the 3 position switch and that makes the 3 position rely on the failsafe located between gps atti and atti (on the assistant).

 

[periquira]

Nobody??

Especially the number 3, please, somebody here knows how to activate RTH without turn off the radio?
Can I stop the RTH and get control during the flight?

 

[Bowley]

You use your end point adjustments on your radio to get the slider in failsafe rather than manual, and check the RTH failsafe mode box.
You can use mixes to have both manual and RTH function. if you want to use RTH as a function rather than a failsafe, I personally consider IOC home lock to be a better option.

60A ESC's and 3S ,, what are you flying?

 

[periquira]

This is a great idea, i will try tomorrow.

I am using 4s 10.000mah lipo for engines and a 3s 450mah for naza.
12x4.7 = 17minutes of flight with fpv gear.