Shutter and Video for Nex Cameras (Zenmuse soon?)

[suddenincline]

I see RC Shutter released a ir that will work on a three pos switch and take images and start and stop video recording so do we expect a update for our Zenmuse soon from DJI anyone hear anything?

 

[HEX junky]

They are working on it. It is "not" just a firmware change

 

[velaperamo]

I see RC Shutter released a ir that will work on a three pos switch and take images and start and stop video recording so do we expect a update for our Zenmuse soon from DJI anyone hear anything?

I used this; http://www.gentles.ltd.uk/gentled/shutterplus.htm
But this is much better; http://littlesmartthings.com/stratosnapper/

Regards

 

[ksrimoungchanh]

I got 2 of the IR controller for my NEX7 on my Zenmuse.. works awesome!! plug and play.. I use a servo splitter cable and have both IR on it. One is mounted in front and one in back, in the need to switch while the camera is facing backwards.

I may conside what DJI will release, but for now, it all works.

 

[Zzr]

Awesome! Where you got IR controller?

I got 2 of the IR controller for my NEX7 on my Zenmuse.. works awesome!! plug and play.. I use a servo splitter cable and have both IR on it. One is mounted in front and one in back, in the need to switch while the camera is facing backwards.

I may conside what DJI will release, but for now, it all works.

 

[ksrimoungchanh]

RCshutter.com, on the left, choose "RC Shutter System", then find your camera type. the one I picked up was:
http://www.rcshutter.com/index.php?route=product/product&path=20_66&product_id=55

Hope this helps you.

KS

 

[Zzr]

Thanks. Where it mount on? for Z15

RCshutter.com, on the left, choose "RC Shutter System", then find your camera type. the one I picked up was:
http://www.rcshutter.com/index.php?route=product/product&path=20_66&product_id=55

Hope this helps you.

KS

 

[ksrimoungchanh]

I just mount it on top of the Zen15 plate... with about 1 inch hanging down on front.. and then my other one is same, but in the back... hanging down.

Late here, and will upload image later.

KS

 

[ksrimoungchanh]

here is where I mounted 2 of the RCshutters IR remotes. "circled in RED".

View attachment 7004

 

[Zzr]

Thanks for upload image that help. DJI is still working on? Firmware or Hardware?

here is where I mounted 2 of the RCshutters IR remotes. "circled in RED".

View attachment 9108