S900+ Zenmuse Z15-GH4 1 pilot setup with FULL Control Gimbal SOLUTION! but it's safe?

pakapp

New Member
Hi!
I had new setup to gain full access gimbal control 1 pilot setup ( Mode, Pan, Tilt and Shutter ). My spec:
Dji S900, A2 + zenmuse z15 gh4, Futaba T8fg super

My firs setup is gimbal GCU connected to A2 F ports ( F2, F3, F4 ) mapped as f2 mode, f3 tilt and f4 shutter. I need also Pan but no free port. Only use A2 built-it receiver.

I use external Futaba receiver R6208 and connect from Sbus port to A2 X2 socket. I need only one channel for Pan. So I put cable to 8 channel of R6208 and connect them to GCU to Pan port. In DJI assistant receiver type is DR16.
Turn on s900, I mapped channel 8 to Pan in Assistant and..... Finaly I got full access of gimbal Tilt, Pan, Mode and Shutter.
Every thing looks ok, no conflict. Aileron, rudder, throtle and elevator works fine.

I wounder it's safe satup ? I don't want to crash my s900. Any suggestion?
 

Top