S800 Evo Landing Gear not working

[SmithyFpv]

Hey Guys,

Ok so i just can't get the landing gear to go up, i have selected intelligent gear too on so i know it wont go up until i go above 5 meters. There is a way around this however by flicking the switch back and fort 5 times, i've tried this and still no luck. I also took her out for her maiden flight and the gear never went up??? I have a green light on the retracts so everything looks ok.

I might add that when i try to calibrate the gear by holding the reset button as i power on i do get the flashing yellow light as stated in the manual but it does that for ages and theres no confirmation.

Please can someone help thanks!

 

[Tuomas P.]

So if you take out he altitude feature, do they work normally then? Also if you get the yellow light for ages, try holding the calibration button down while powering up. Worked on mine when calibration was needed. Personally I fly so low often, that altitude based gear feature wont work ...tuomas

 

[SmithyFpv]

So if you take out he altitude feature, do they work normally then? Also if you get the yellow light for ages, try holding the calibration button down while powering up. Worked on mine...tuomas

Ye the procedure I don't was unplug from F1 power on while holding reset , then it turns to flashing yellow but it just keeps doing flashing. A guy last night told me to press the button again while its flashing and then it will become a slower yellow flash and then it should work, haven't got to try it yet. Have you ever heard of doing that?

 

[SmithyFpv]

Tried calibrating again and nothing happening, anyone have any ideas please?