KK Flight Controller quad seems to get worse the more i fly

7808

Member
I build a quad copter, flew it around, couple weeks later updated the firmware on the ESCs (simonK on hk blues) and flashed my kk2.1 to 1.11 anyways none of that effected this, but I noticed the longer I fly, the more I have to compensate, like my trims are off. anyone had this happen or know what would cause it?

like when I 1st take off I can hover easily without much input by the time I flew for few minutes, I have to fly like my trims are not set
 


aakemp123

New Member
I've done some research on this myself, I have the same problem in auto level mode! From what I've read, it seems like the gyros get "bumped" in flight and it effects what the multirotor perceives as level. The more you fly, the worse it gets. As far as I know the best way to keep flying is to just keep auto level off and learn to control it without auto level, which turned out to be pretty easy to do anyway.
 

mechanike

Member
i would suggest feeling the heat of the motors and finding the one thats slowing down as your using,imo,,,,,,,,,,,,
 

Top