QAV 540G Full AP and FPV kit with radio NEVER CRASHED!

[spyncycle]

Selling my fuly loaded QAV 550G complete with Spektrum transmitter, Fatshark goggles and full FPV kit. I built this quad very carefully over the course of several weeks, tuned it to Lumenier’s specs (for both gimbal and Naza) and it flies beautifully. Flown less than 20 packs with NO crashes and NO hard landings. FPV is set-up on a 1.3 Ghz system for greater range but there is also a Fatshark 5.8Ghz 250mw trans. mounted to the 1.3 receiver for a wireless connection to the goggles so you can easily switch to 5.8 using the included gear (I’ll include the custom harness I made for that application as well). This quad is fantastic and I have NO complaints- it is by far the best of the five I’ve built and flown. I’m only selling because I need to downsize. I’m throwing in (2) 5100mah 4S batteries but they each have 30+ charge cycles so I would recommend fresh packs. If you have batteries, I can hold them back to save you $ on shipping. Close to $3,000.00 invested. Asking $1400.00 for everything, buyer pays shipping.



Here’s the gear:



QAV 550G

2-axis gimbal

Flyduino AlexMos 2-axis controller

DJI Naza V2

(4) Tiger Motor MT-2212-13 980kv

(4) Graupner E-Prop 10x5 props (brand new- one flight!)

(4) RCMC 30A Simon K ESC’s

Spektrum AR-8000

Spektrum DX-8

-Soft case for DX-8

-Custom thumb pads for sticks on DX-8

Spektrum TM-1000 (new in package- not pictured)

Shellz GPS mount

RCMC 600 FPV Camera with upgraded 2.8mm lens (wider view than stock)

DJI IOSD2 mini

Fatshark Attitude Goggles

5.8GHz Circular Polarized spiroNet Antenna

Fatshark 250mw 5.8Ghz transmitter

1.3GHz 300mW Transmitter

VAS - 1.3 GHz Airscrew Cloverleaf Ultra Antenna

900MHz-1.3Ghz Receiver SAW w/1258 Custom RMRC Version 3

VAS - 1.3 GHz 10dBic Crosshair Antenna RHCP

(2) RMRC 5100mAh 4S 35C Lipo Packs

***30-40 used charge cycles

View attachment 24395 View attachment 24396 View attachment 24397 View attachment 24398 View attachment 24399 View attachment 24400 View attachment 24401 View attachment 24402 View attachment 24403 View attachment 24404 View attachment 24405

 

[Darson Hall]

Built one of these year and a half ago but yours... that is one sweet, tidy, meticulously constructed machine! Very nice work.

 

[spyncycle]

Thanks Darson- Much appreciated! Pains me to sell it but I need to scale back. No nibbles yet. Think I'm way off on price? Figured with all the gear and the fx-8 it was a decent start but maybe not?

 

[Darson Hall]

All that gear, this is a smoking-hot deal. Maybe try the Open Pilot forum, they seem a little more into this type of copter. Or go the ebay route?

 

[Darson Hall]

Did notice the motors you have listed might be incorrect. I think those are the 4006 740kv?

 

[spyncycle]

That's a great idea- thanks Darson. And you are correct on the motors- they are 740kv. Thanks for the catch!