JosephCook
Member
Hi everyone, I hoping someone can please help me with an issue I'm having. I have flown the DJI Phantom for about 2 years and then I upgraded to a custom built Hexacopter recently. I finally seem to have all the kinks worked out but it is giving me other issues now. I shot a video today, while not taking it to high for safety reasons. I cut all the semi-smooth stuff at the beginning and put the bad stuff at the end all together so you could see what it was doing. It was flying smooth and steady on GPS and Atti mode but every so often a very light breeze and sometime not at all and the hexa would act like it was going in to convulsions or like a small seizure. Possible gains not set high enough? Blades not being perfectly balanced? (which they should be) Any ideas?
Everything is brand new, iPower iBM2814Q 750KV motors, ipeaka iq 40a opto hv brushless esc with simonk firmware, DJI Naza-m V2, Hitec Optima 9 channel receiver, Hitec Aurora 9 radio
Password is: flight
Everything is brand new, iPower iBM2814Q 750KV motors, ipeaka iq 40a opto hv brushless esc with simonk firmware, DJI Naza-m V2, Hitec Optima 9 channel receiver, Hitec Aurora 9 radio
Password is: flight
Last edited by a moderator: