redridinghood
Member
Photohigher joined the game against Picloc 3x and DJI's Zen(its so secret we don't even know) stabilization systems.
http://vimeo.com/39091397
http://vimeo.com/39091397
Photohigher's new gimbal stabilization
- Thread starter redridinghood
- Start date
Macsgrafs
Active Member
Is that setup mounted on a DJI F550...
It looks really good, and just the right time to give us a hint on what they are playing with now that Z15 is coming..
Knowing this was in the works along with some other things at Photohigher is the biggest reason why I have no interest in the overpriced Z15. I've gotten outstanding support from the folks at Photohigher and the best video I've recorded has all been with an AV130. As soon as the upgrades are available I'll be fitting them to both of the 130s I currently have and I'll be waiting for more of the new products to be released.
First to be upgraded is my Cinestar6/AV130 combo, can't wait to see what it will be capable of with the latest and greatest!
Ken
redridinghood
Member
It does look really good, and it can be used to stabilize more than a Nex camera.
Benjamin Rowland
Member
Looks good. I'm also wondering if it works with the Cinestar gimbal.
Elliott000
Member
nice, im thinkin ill have to get one of these controllers and gimbal's will my nikon d7000 fit in an AV130? or do i need a 200.
Thanks and nice work
Thanks and nice work
skivvie
Member
From the measurements I took ... You'll need a av200... I was planning on putting my d7000 on a photohigher as well.
ZAxis
Member
Looks like we made the right decision to buy the AV130. Hopefully this will mean no more dependency on the MK tilt/roll control which has never quite got there.
Intrigued as to the need for an extra receiver, for tilt control only?, perhaps it will be possible to hijack one of the MK servo outputs instead. I guess we'll need another channel when the pan control is added. It would be nice to only need the one Tx if you're a single pilot operation.
Really looking forward to seeing it in the flesh.
andy
(Lec... tell Geoff we'll take one)
Intrigued as to the need for an extra receiver, for tilt control only?, perhaps it will be possible to hijack one of the MK servo outputs instead. I guess we'll need another channel when the pan control is added. It would be nice to only need the one Tx if you're a single pilot operation.
Really looking forward to seeing it in the flesh.
andy
(Lec... tell Geoff we'll take one)
redridinghood
Member
View attachment 3674
- Water Resistant – IP 65
- Compact disk form factor – 38mm Diameter and 14mm Height
- Weight – 12gram
- Processor – ARM 32-bit Cortex™-M3 CPU
- Update Rate – 800Hz
- Sensor Technology – 3-Axis MEMS gyro and accelerometer
- Power - Operates on a wide range of input voltages (4V – 7.2V)
- Adjustable Gains
Attachments
matthew.wright5
Member
But will it blend?
No seriousl, will this system work with roll/tilt systems like my CX-3? Would be awesome!
No seriousl, will this system work with roll/tilt systems like my CX-3? Would be awesome!
Macsgrafs
Active Member
ZAxis
Member
I don't spend much time looking at other forums but I did find this on the Mikrokopter one. Its packed full of info about PhotoHigher and their developments, another interesting read.
andy
http://forum.mikrokopter.de/topic-32894.html
andy
http://forum.mikrokopter.de/topic-32894.html
BorisS
Drone Enthusiast
Its interesting how the PH and DJI gimbal approaches are similar but (maybe) still a little different:
NEW Hero Camera Gimbal Series, comprising:
• Hero 1000 – for GoPro
• Hero 2000 – for Nex 5 Gh2 550D etc.
• Hero 3000 – for Epic, C300 FX100 , F3 etc.
• Hero 3D – as the 3000, but for 2 Cameras and with automatic Convergence correction
from http://forum.mikrokopter.de/topic-32894.html
DJi is going with the same approach also differentiating between a NEX 5 / 7 and a GH 1 and Gh 2.
http://www.dji-innovations.com/minisite/Z15_preorder_en.html
Additional assembly parts of gimbal for different Camera model my require.
But probably both will du the same to keep the camera in COG.
Boris
NEW Hero Camera Gimbal Series, comprising:
• Hero 1000 – for GoPro
• Hero 2000 – for Nex 5 Gh2 550D etc.
• Hero 3000 – for Epic, C300 FX100 , F3 etc.
• Hero 3D – as the 3000, but for 2 Cameras and with automatic Convergence correction
from http://forum.mikrokopter.de/topic-32894.html
DJi is going with the same approach also differentiating between a NEX 5 / 7 and a GH 1 and Gh 2.
http://www.dji-innovations.com/minisite/Z15_preorder_en.html
Additional assembly parts of gimbal for different Camera model my require.
But probably both will du the same to keep the camera in COG.
Boris