XAircraft OSD overlay shows but no video

[traxx2003]

Ok, so now my OSD flight data overlay shows on my monitor, but no video from camera, so far this is what I've done to troubleshoot this issue:
1. camera cap off
2. tested camera by connecting it directly to my video transmitter on board the quad, I got clear video feed to the monitor.
3. inspected connections between the I/O and OSD module, everything seem ok.
4. check continuity on all of my video wire cables, no broken wires found.

What else could it be? Anybody ?

 

[X650Mouse]

You are not having much luck are you? make sure VTX and OSD are both set to NTSC

X

 

[traxx2003]

No luck at all! Yes they are. My video xmitter is the ImmersionRC 600mw, I believe ntsc is default setting on it.

 

[traxx2003]

Update: finally resolved my OSD/no video problem, it was a bad OSD module, got a replacement module from cb helicopter.com, problem solved.