All, I recently purchased a Naza-M and I wanted to play with it on the bench while I am waiting on other parts. So I hooked it up to my Futaba FP-R127DF receiver which I had left over from an old Heli. I also simply hooked up a couple servos for testing. My TX is a 72Mhz Futaba T6XHs. In the assistant software I selected PPM since my remote was in PPM mode. For some reason it seems no matter what I try I can not get the sliders to move on the calibration screen.
I can hear the servos are powered up and I verified that the TX is talking to the RX by removing the Naza and directly controlling the servos from the receiver.
Can anyone tell me if the RX and TX I have are compatible with the Naza-M?
Also, since I am assuming my RX is not compatible can you tell me what $50 - $100 RX/TX combos are compatible?
Thanks
David
I can hear the servos are powered up and I verified that the TX is talking to the RX by removing the Naza and directly controlling the servos from the receiver.
Can anyone tell me if the RX and TX I have are compatible with the Naza-M?
Also, since I am assuming my RX is not compatible can you tell me what $50 - $100 RX/TX combos are compatible?
Thanks
David