Need help with qr x350 pro

[Seiran]

Hello guys

I need some help with mission planner
Settings with de qr x350 pro mostly about the compass.

Its external below the right rear arm on the landings leg.

I updated the quad to firmware 1.7
And downloaded the factory parameters

But under compass tab in mission planner it set on 180degrees yaw

But when you lay a imationary compass on top of the quad the arm and the leg is located at 135 degrees.

Wat doe you guys got on this tab in mission planner with this quad?

 

[GlassKnees]

I'm not sure exactly how your compass is oriented - perhaps you can post a picture? I do know that I had a flyaway when I accidentally had the wrong compass orientation setting. On my three multicopters, the compass is built into the GPS antenna which sits on top of the aircraft. The compass is underneath the GPS antenna, so my Compass Orientation is set to "Roll180", which works for me.

Don't forget to enter your local magnetic variation (Compass Declination) - you can obtain it here: http://www.ngdc.noaa.gov/geomag-web/
You will have to convert degress/minutes to radians. If it's East, you will enter a negative value, or postive if it's west. For example, I live in central Texas, so my magnetic variation is 4 gegrees 2 minutes East; converting to radians gives me the value: -0.070.