Naza gimble

[Inmatecell11]

Do I plug my RX into the naza for controlling foreword pitch of gimble with the control knob of my tx ? Is this possible ?

 

[PeterLester]

Yes as long as your Radio Control system has enough channels as required by NAZA for all the ouputs. It's all in the manual...... see the diagram/schematic of all the connections.

 

[tstrike]

F2 plug of naza to an Aux port (1, 2,or 3) on receiver, then go into your transmitter's switch select menu, scroll to whatever Aux channel you plugged the F2 in and select it then assign your knob to that channel. Go into naza assistant, go to gimbal setup, assign F2 to your chosen Aux port and you should be good to go.

 

[Inmatecell11]

Sweet! Thanks!

 

[Inmatecell11]

So it's aux 1 to x1
Aux 2 to x2 and then out from naza f1 f2 to gimble servos?

 

[tstrike]

yeah sorry f1 and f2 let the naza control gimbal pitch and roll, X1 to an Aux channel on Receiver then assign your switches and tell naza assistant what channel you're using to control pitch.

 

[Inmatecell11]

Thanks man! It's all clear to me now! This is the best place to come to get this all figured out!
Much apreciated