Bartman
Welcome to MultiRotorForums.com!!
While building a new XY-8 for myself I found that half the capacitors on my Bl 2.0's are loose. This Okto power distribution board board came pre-assembled and I think it was manufactured in Germany. The capacitors have a small blob of black adhesive (hot glue I think) under each of them and half of them have broken loose which would allow them to vibrate eventually causing their legs to break away from the board. The caps either broke loose during use or from the heat while attaching motor wires. Either way, if you have a pre-assembled board with the black adhesive under the caps (also known as Elko's), check to make sure they haven't come loose.
If you're building an MK and there isn't any hot glue under the caps, you'll probably want to add some.
Regards,
Bart
If you're building an MK and there isn't any hot glue under the caps, you'll probably want to add some.
Regards,
Bart
