MK Flight control / I2C serializer / turningy plush ESC's strange behavior

D

daniel

Member

Did anybody in this forum that have experience with MK flight control and I2C serializer, have any idea why only 3 motors in my hexa are working more than the others???

motor #1
motor #3
and motor #5 are the ones doing all the job of lifting,....after 5 minute flight the engines are hot and the other 3 motors are cool,
Dont know if has to be with mixer setup in MK tools....
But in my other hexa with mk electronics and BL's they all work the same, the 6 motors get warm exactly the same temperature.....

Bizarre!!!

thanks again for the help

daniel

<tbody>
</tbody>
 

H

hugy

Member
Look for any bent arms. If these motors have to work more than the rest it means there is some yaw going on which they are trying to resist. So something is off.
 


H

hugy

Member
Well it is quite simple, they can't do more than the rest if your copter is built straight. If they do you copter would be constantly yawing.
 

You must log in or register to reply here.
Top