Kloner, your Suppo motors
- Thread starter JG-rn
- Start date
kloner
Aerial DP
the ones i run are 28mm suppo. they carry alot more weight, fly better in wind but there power hungy pigs. i had to prop it back so it quit trying to rip itself apart but once i found it's sweet spot, naza was happy, disco was happy, kloner was happy. However almost everybody when talks about motors likes longer flight times. i'd say in that case 22mm anything will last longer but also wouldn't fly as fast.
the other problem is they don't have a multi rotor prop shaft so you gotta improvise. Because of that i'm building a new disco with the leopard 2814 930kv motors. I love how they are on my xy-8 in a lower kv, rated for 500 watts and up to 5 or 6s
the other problem is they don't have a multi rotor prop shaft so you gotta improvise. Because of that i'm building a new disco with the leopard 2814 930kv motors. I love how they are on my xy-8 in a lower kv, rated for 500 watts and up to 5 or 6s
DucktileMedia
Drone Enthusiast
OK, you just referred to yourself in the 3rd person. Just chill! 
DucktileMedia
Drone Enthusiast
yeah. 28's are way too much. I have a temp solution for the gear, i can send you a pair. Funny how making folding gear has been the hardest part of this project. Flies great though!
kloner
Aerial DP
hahahaha, listen to them things, no oscilating, no weird behaviour, just so big on a dji arm that when the slightest problem comes along, naza hates it and does some fancy things. they all bo, but a 28mm is sooner in the breakdown phase to go nazanitsown than a 22mm
Last edited by a moderator:
Tomstoy2
Member
Damn, Kloner, that thing just rips! Always enjoy watching your vids, my friend.
No flying for me, despite 60 degree weather.
At work, they just went to 12 hr days, or nites in my case. It's taking a tole on me. Woke up early, 3pm, specifically to get a flight in, but promply fell asleep during my coffee!!!
No flying for me, despite 60 degree weather.
At work, they just went to 12 hr days, or nites in my case. It's taking a tole on me. Woke up early, 3pm, specifically to get a flight in, but promply fell asleep during my coffee!!!
Last edited by a moderator:
These sunnysky 2814 900kv look really nice for a disco
http://epbuddy.com/index.php?main_page=product_info&cPath=31&products_id=382
Only problem is they're green. Lol
http://epbuddy.com/index.php?main_page=product_info&cPath=31&products_id=382
Only problem is they're green. Lol
kloner
Aerial DP
http://www.altitudehobbies.com/brus...-motors/leopard-3536-8t-960kv-brushless-motor
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=19586
you can fly with the prop adapters they come with they just suck. if the nut gets loose the pro adapter can leave
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=19586
you can fly with the prop adapters they come with they just suck. if the nut gets loose the pro adapter can leave
whixh do you like better, the suppo's or those leopards? 30a esc's are sufficient?
Was reading those leopards are really 1060kv
http://www.rcgroups.com/forums/showthread.php?t=1810232
Cool.
You think this looks like a good deal?
http://www.rcgroups.com/forums/showthread.php?t=1827042
I canceled my order with trappy because he's so backed up with shipping. I now need to find a Vtx and Rx.
kloner
Aerial DP
just start with what you got now, i would think you would change em, but i'm thinking you'll see pretty fast if that's the case. loose, turn up the gain, high speed oscilation, turn it down
lawmate 2.4 is the best. if your gonna fly around other people using futaba, spek and hitec you'll most likely want to pick the glue out. pm me for details. you want to use ch5 or 8... if not around other 2.4 radios, leave it alone
On them motors, put them on and spin them up, if theres much any noise, feel around for vibes running. turn the prop adapters on any that shake to the point you know its on. dialed in it feels like nothing is turned on without props.... from there, run em. usually the firt thing people notice with the bigger motors is the lack of runtime. They do eat more power. there heavier so just lifting themselves goes up and amp or two draw. but man, put that thing out in a hover on a windy day and it should lock in like a spaceship
lawmate 2.4 is the best. if your gonna fly around other people using futaba, spek and hitec you'll most likely want to pick the glue out. pm me for details. you want to use ch5 or 8... if not around other 2.4 radios, leave it alone
On them motors, put them on and spin them up, if theres much any noise, feel around for vibes running. turn the prop adapters on any that shake to the point you know its on. dialed in it feels like nothing is turned on without props.... from there, run em. usually the firt thing people notice with the bigger motors is the lack of runtime. They do eat more power. there heavier so just lifting themselves goes up and amp or two draw. but man, put that thing out in a hover on a windy day and it should lock in like a spaceship
Got the lawmate combo today. Looks like I got the unlocked version. It's doesnt have any glue on the channel switch. Also has a second heat sink on it...not sure if they do that when its "tuned".
I don't fly (yet) with anyone. Should I keep it on Ch1 or just put it on 5 or 8? Does a particular Ch work better than the others?