looking to build back up a octo cinestar and just have it on the desk in the office
anyone got motors that would fit it and 12 inch props?
thinking cheap.
ill pay shipping
Thanks
C
they dont have to run
Are you looking to build to the original MK 4s or the newer version 6S MK or 6S DJI FC like WKM,NAZA 2, N3, A2, or A3. Depending on the boom size will dictate what props you use. The original configuration used 4S with 770KV Quadrocopter branded motors. I believe the model number is the QC 3328's. I have 8 of those but they are in my shop in another state. Those motors were mated with 14 inch APC bow tie props. They are very insufficient for anything requiring a lot of weight. They were ok back in the day before brushless gimbals really became mainstream and we were flying the original Freefly Radian Servo belt gimbal. Once the Movi came out you could not fly the thing with a GH4 and a movi.
I upgraded to Tiger MN4014 330 KV's on 550 boom arms and 16 inch 8 pitch props which are needed at my altitude. At sea level I would go to 6 pitch. I would get about 12-15 min of flight time on 20,000 mAh with a 10 pound payload gimbal and camera. The max weight was 15 pounds for about 7.5 minutes, it was probably not that safe at that weight. I still use the bird as a backup platform for a A7S, otherwise I would offload my tigers. I would go that guys tiger motors. They are pretty solid motors.
