I've got the kit assembled and carried out the basic props off/props on test before giving it a little more juice at which point it very rapidly tilted to the right and took out a prop.
Notched out a couple of 2x3's to allow a couple of inches of vertical movement (over cautious novice or what) when sitting over the LG skids. Retested with new prop and I can clearly see that the front LH motor (2) is lifting quite aggressively.
Removed props and hooked up Laptop and calibrated RC in Xaircraft Center. Sure enough, pitch, roll and yaw were way off centre.
Refitted props and retested - same bias towards front Lh Motor (2).
What's my next step to introduce some balance so I can get this thing airborne?
What flight mode is best for take off/landing cruise or hover?
Notched out a couple of 2x3's to allow a couple of inches of vertical movement (over cautious novice or what) when sitting over the LG skids. Retested with new prop and I can clearly see that the front LH motor (2) is lifting quite aggressively.
Removed props and hooked up Laptop and calibrated RC in Xaircraft Center. Sure enough, pitch, roll and yaw were way off centre.
Refitted props and retested - same bias towards front Lh Motor (2).
What's my next step to introduce some balance so I can get this thing airborne?
What flight mode is best for take off/landing cruise or hover?