gb190 racekit build

[danq0]

My last thread looked too much like spam and was deleted
anyways I edited it accordingly, hopefully this one will pass

COPY AND PASTE: gearbest.com/multi-rotor-parts/pp_413709.html?lkid=10005809
Build of the GB190 Ultimate Race Kit

The last kit gearbest came out with, already had some SERIOUS power, this kit is serious OVERKILL!!
Emax RS2205, 2300kv motors, LittleBee 30AMP ESC's, all on a tiny 190mm XFrame...I'm scared to fly this

Included Contents
-GEP-ZX5 Carbon Fiber 190mm XFrame
-SPFRacing F3 10DOF Flight Controller
-EMAX RS2205 2300kv Motors
-LittleBee 30Amp 2S-6S ESC
-1000TVL Mini Camera
-5.8ghz 500mW VTX
-5.8ghz Circularly Polarized Antenna
-5045BN Triblade Propellers
-Power Distribution Board
-Misc. Hardware

BUILD IN PROGRESS...

Detailed specifications:

Videos
Unbox

Build Progress...

Frame

Arms are bolted to the frame

the screws are held on by an aluminum bracket

test fitting middle piece

test fitting top plate, this will hold the camera, VTX, and an action cam if you choose to

Frame is done

another shot of fully assembled frame

Installing PDB, I purchased my own PDB> this one comes with LC filter, BEC's, and OSD.

 

[danq0]

more progress...

IMO these ESC's are a little too big for this frame, it fits, but barely

Started removing ESC wires on the motor side

motor wires need to be cut down to size to fit

95%of motor wires was cut off and soldered to esc

ESC signal and ground are soldered to flight controller

soldered on XT60 connector

assembled camera and camera adapter

installed VTX

Put everything together and here is the final product:

 

[danq0]

Videos
Unbox

Assembly Frame:

Assembly

Flight Tests

http://www.gearbest.com/multi-rotor-parts/pp_413709.html?lkid=10005809