I was hoping for input/help from others with the same built as me.
I have a DJI F550 with Wookong. Stock motors and ESCs.
Graupner 10x5 props and Flightmax 8000mah S4 batteries.
Reason for not S3 batteries and 10x5 Graupners is the AG550 gimbal from Tppacks.
With my NEX5-n with 18-55mm lens I am pushing 3kg weight! When I get my OSD and FPV camera and 1.2Ghz videotransmitter I guess I will be around 3.1kgs.
This setup is flying ok - but could perform better for super smooth video!
By the way I am very pleased with the GPS/ATTI mode when full gps lock. It hovers in a locked position on the spot! Just a few cm travel depending on wind of course. I basicly fly in very good conditions with max 2-3 m/s.
I now have my basic gain settings in WKM software set to 150/150/125/125 and atti: 70/70. The gain settings for pitch and roll on the gimbal is set too 55/55.
I have also set my Futuba T8FG to 30% expo.
I fly mainly in GPS/atti mode. But it seems a bit twitchy and sometimes responses a bit too fast so the video gets a bit off level for a split second. This ruins those super smooth crane shots when I descend and turn a bit at the same time. I am aware of the point that these things need to fly and have some movement in order to get smooth video, or else they ascend and descend in their own prop wind.
I was hoping there where others out there with similar or exact same setup that have more experience and can share their settings.
I also have ordered bigger motors, Tiger Motors 2216 with a bit more power - 210w! And I understand they will run fine on the stock 30A escs. But now, after flying a few batteries with stock motors, they seem fine and working good. I hover just above 50% throttle and after 5 min flight time, the motors are not warm!
But maybe I will get smoother flying with bigger motors. Less throttle and they probably need less input to perform. Dont know.
Greatful for any input. Safe flying everyone
I have a DJI F550 with Wookong. Stock motors and ESCs.
Graupner 10x5 props and Flightmax 8000mah S4 batteries.
Reason for not S3 batteries and 10x5 Graupners is the AG550 gimbal from Tppacks.
With my NEX5-n with 18-55mm lens I am pushing 3kg weight! When I get my OSD and FPV camera and 1.2Ghz videotransmitter I guess I will be around 3.1kgs.
This setup is flying ok - but could perform better for super smooth video!
By the way I am very pleased with the GPS/ATTI mode when full gps lock. It hovers in a locked position on the spot! Just a few cm travel depending on wind of course. I basicly fly in very good conditions with max 2-3 m/s.
I now have my basic gain settings in WKM software set to 150/150/125/125 and atti: 70/70. The gain settings for pitch and roll on the gimbal is set too 55/55.
I have also set my Futuba T8FG to 30% expo.
I fly mainly in GPS/atti mode. But it seems a bit twitchy and sometimes responses a bit too fast so the video gets a bit off level for a split second. This ruins those super smooth crane shots when I descend and turn a bit at the same time. I am aware of the point that these things need to fly and have some movement in order to get smooth video, or else they ascend and descend in their own prop wind.
I was hoping there where others out there with similar or exact same setup that have more experience and can share their settings.
I also have ordered bigger motors, Tiger Motors 2216 with a bit more power - 210w! And I understand they will run fine on the stock 30A escs. But now, after flying a few batteries with stock motors, they seem fine and working good. I hover just above 50% throttle and after 5 min flight time, the motors are not warm!
But maybe I will get smoother flying with bigger motors. Less throttle and they probably need less input to perform. Dont know.
Greatful for any input. Safe flying everyone