FPV problem - help please!

domx

Member
Hi all,

I have a DJI F550 with GoPro 3 and an FPV setup of ImmersionRC iOSD and 5.8Ghz TX. It's worked fine for a year or so, until today! I decided to tidy up the setup today by putting a couple of the components under the top plate, but by the time I'd finished and went for a test flight, the FPV image on my Black Pearl is unusable (
)

I took the whole setup back to it's original layout but that didn't help. I then tried a different BP monitor, a different 5.8Ghz TX, different antennas and re-checked all the connectors, but nothing fixed the issue.

Any thoughts?

Thanks,
Dom.
 


haha49

Member
Check the modes on the LCD screen looks like pal and NTSC is switched. Might of set the screen to it's default setting or it changed on the gopro.

Ps I bought a pal camara when I use ntsc for everything else switching for 1 cheap camera is a pain in the rear but it does that same exact thing. So I suspect the gopro is pal or ntsc and the moniter is set to the opposite.
 


Top