Firmware update problem for octo

[david pritchard]

Hello,

I just installed my wkm on an octo and confirmed everythings wired correct. Everything starts fine and has gps signal. I'm running the latest
software assistant 1.20 with 5.0 firmware. The problem is with the octo and standard receiver I need to update the firmware to 5.2, but the
software assistant will not give me the option to update the firmware. Also the x1 (voltage monitor) and x2 (Orientation control) do not receive
a signal in the software, I am hoping this is due to running the 5.0 firmware. Anyone had this problem?
I've re installed the software and restarted the computer, no help. For a while I had an error code "VOL LOW (4)" but it went away, now there are no error codes.
Motor mixer is set to octo, transmitter calibrated and confirmed sending correct signal by testing channel on x3.

Thanks--head is exploding.

 

[DucktileMedia]

When you get it solved can you do us a favor and pull a prop off and let us know if it still flies. I've been very curious about the redundancy of DJI.

sorry I cant help with the issue.

 

[david pritchard]

Sure will !