ESC setting for u7 420

[maxwelltub]

Wondering esc settings people are using for the U7 420kv motors. I've been messing around with the t motor 80 amp escs and getting mixed results. The Herk board works so much better and trying to get better results with these ESCs.

 

[Hexacrafter]

I asked this to T-Motor when they were released. They said....Leave all at default
1. Brake- Default- Disabled
2. Battery- Default- Lixx
3. LV Protect Cut-off mode- Default- Soft Cut Off
4. LV Protection Threshold- Default- Medium
5. Start-up Mode- Default- Normal
6. Timing- Default- Low
This is what we tell our clients as per T-Motor.

 

[maxwelltub]

Seems like soft cut should be turned off if anything.

 

[Carapau]

Turn off soft cut off and you tend to get hard cut off. Soft cut off is definitely the preferential option!