SamaraMedia
Active Member
So I'm building a Tarot X6 with KDE 4012 400kv, KDE triple props and 55 amp esc's. The build plans call for the esc to go under the motor but the 55 amp esc are a little large to fit in the space provided and I would need to cut the long motor leads to accommodate this setup. I would prefer to mount the esc's inside the center plate but means I need to bore out the hole at the end of the arm to allow the three motor leads to fit through instead of the stock motor and esc wires provide for the under motor setup. I've already bored out the ends for the three motor leads and located the esc's inside the center plate but wonder what others feel is the best location for the esc's. DJI S900 has built in esc under motor. Hexacrafter, Aerovonics Cinestar and a few other heavy lifters have esc's inside the center plate area. T-Motor and KDE both offer their bigger motors with extra long leads to reach inside the center plates so I wonder what other builders here prefer for esc location.
Thanks,
John
Thanks,
John