Droidworx Skyjib Octo ARTF or frame and parts KDE, Plettenberg

This was our back up kit for our main Skyjib X8 system, it was never fully built, however various parts were used on our main system before being replaced with upgrades. EDIT - selling as an RTF system now! still includes all below, but built by us and will provide a half day training too!

Here's the list:

Frame bits:
Skyjib 8 Lite (pre-titanium series) frame - X8 config. Will take up to 16" props with installed booms.
FC mounting plate, IMU mounting plate and extra plate.
Motor mounts x16 - sets for smaller and larger motors.
Extra motor mounts.
Extra boom mounts.
Battery mounts x 4
Clear crash dome.
Orange crash dome.
Crash Cage.
Longer booms x 4 - will allow up to 18" props.
Original fixed landing gear.
Quick release gimbal mount system, with green, red and black anti vibe (green is really tough for 6kg plus).
£600 for the lot

Retractable landing gear - extended version - fits Movi underneath.
£300

Rm9yZodEpUBCx6gojmcabWP0H56d53ukH2EcjsaaUHSj2-Mohku6sDEE6cXnKdL4NQ9L_PQfgA1UL6M=w1886-h920

pRqeU4sjAMBPZuFmn3_9c1lUfedn50NrEHUj9_Lvtiy35NBV4DPALt1zJkaWSalu3FL_9AhP1CayYJo=w1886-h920


Electronics:
KDE 35a ESCs x 8 - pre-soldered to droidworx power distribution plate with 2 x EC5 battery connectors. These have been flown for about 4 flight hours before we moved up to 55a ESCs for larger payloads. Can un-solder on request.
£250 with PDB or £30 each

WxHz_IYJAhF3re-C2juwY5wyHw4CaHpBR1IRX0oyAdXcDVqwQNBr0Glgl3zs1_wkPEyO2YBhK10dLgk=w1886-h920


Plettenberg 15-20 motors x 10 - recently serviced and used for about 10 flight hours in total. Will fly up to 14" props on 5S - great for GH4 size cameras. Come with prop adapters - pic on request.
£400 for the lot or £50 each.

Gens Ace 5S 25C 10ah lipo packs with EC5s x 12 (flown as 6 pairs), low resistance, had about 30 cycles. pics on request.
£450 for the lot or £45 each.

Feel free to drop me an email - jack@horizonap.com with any questions/offers!

Cheers
 
Last edited by a moderator:


Top