DJI Releases New Firmware for the Inspire 1 Series

[DJI Innovations]

New firmware updates are available for DJI Inspire 1 series, please visit respective product pages to download and update your firmware.

Inspire 1 and Inspire 1 Pro
1. Firmware upgraded to v1.8.1.00
2. DJI GO Android upgraded to v2.7.2

Major Updates
1. Improved encryption to enhance security during transmission. Both the aircraft and the remote controller must be upgraded or else they will not link.
2. Fixed the issue of batteries over-discharging when stored for extended periods of time (over 90 days).
3. Fixed the issue of landing gears lowering in midair on rare occasions.
4. Improved stability for camera.
5. Optimized gimbal parameters.

Notes
Be sure to upgrade the aircraft before upgrading the remote controller, otherwise the aircraft may not able to exit Transport mode properly.
Battery firmware is included in this All-in-One firmware update. Update all Intelligent Flight Batteries by using this firmware.
Camera version v1.8.1.00 and aircraft version v1.8.1.00 should be displayed on DJI GO as this update is only for the gimbal and camera system. The version will only display correctly in DJI GO after connecting to the Internet when upgrade is complete.

Inspire 1 RAW
1. Firmware upgraded to v01.08.00.90
2. DJI GO Android upgraded to v2.7.2
3. DJI CineLight upgraded to v0.9.9
4. DJI Camera Exporter upgraded to v1.0


Major Updates
1. Improved encryption to enhance security during transmission. Both the aircraft and the remote controller must be upgraded or else they will not link.
2. Improved stability for camera.
3. Optimized gimbal parameters.

Notes
Be sure to upgrade the aircraft before upgrading the remote controller, otherwise the aircraft

 

[azilk]

Good morning - (I am a new owner of inspire PRO) after upgrade using the Go app I have lost controller signal:
1) I used the app to upgrade, it all seemed to go well, that Go app shows that there are no upgrades
2) Now fast flashing yellow light - and app say's no signal
3) I reinstalled the Go app - and now app on home screen "connects" to aircraft but it is defaulting to Inspire 1 instead of inspire Pro
4) At the camera section of the app it still say's no signal and yellow lights still flashing.
5) I'm wondering whether the aircraft upgrade was unsuccessful? but not sure how to determine that.
Is there a way to go back? Or reset the controller? I can't get anything to happen on the app - any quick help, much appreciated

 

[Petr Hejl]

Good morning - (I am a new owner of inspire PRO) after upgrade using the Go app I have lost controller signal:
1) I used the app to upgrade, it all seemed to go well, that Go app shows that there are no upgrades
2) Now fast flashing yellow light - and app say's no signal
3) I reinstalled the Go app - and now app on home screen "connects" to aircraft but it is defaulting to Inspire 1 instead of inspire Pro
4) At the camera section of the app it still say's no signal and yellow lights still flashing.
5) I'm wondering whether the aircraft upgrade was unsuccessful? but not sure how to determine that.
Is there a way to go back? Or reset the controller? I can't get anything to happen on the app - any quick help, much appreciated

Hi @azilk , this may be a bit late, but have you tried re-binding the controller to the aircraft?