Dji naza m lite not arming

[erkan230]

My system conf:
rx&tx turnigy 9x
esc turnigy plush30a (2 years old)
motor NTM 28-30 750kv


ı have a arming problem on my quadcopter
ı calibrate my esc and also tx on dji naza assistant program


but its still not arming


ı wait ur help


http://www.youtube.com/watch?v=fi74YxP5Wbg&feature=youtu.be


Thank you in advance for your interest

 

[OneStopRC]

My system conf:
rx&tx turnigy 9x
esc turnigy plush30a (2 years old)
motor NTM 28-30 750kv


ı have a arming problem on my quadcopter
ı calibrate my esc and also tx on dji naza assistant program


but its still not arming


ı wait ur help


http://www.youtube.com/watch?v=fi74YxP5Wbg&feature=youtu.be


Thank you in advance for your interest

Make sure your throttle channel is not reversed.

 

[jer]

I'd double check with in the naza app your all controls are correct. Should arm in and down.

 

[PeteDee]

Sometimes you also need to do a little trim adjust on the throttle to let the setting be recognized as zero throttle.

Pete

 

[perhe]

try 100% dualrate and endpoints ,on throttle channel and rudder and elevtor and alieron