Recently purchased a F450 off of ebay (bad mistake). Anyway------ I have a Spektrum AR6115e receiver and the KK2.0 controller. I can bind my Tx to the Rx OK. (the light blinks like it binded). When I go to the controller, nothing, it is lit up and works but it is not getting the signal from the Rx. All wires are connected properly. Any IDEAS????????????
KK Flight Controller Controller will not talk to receiver
- Thread starter mrself58
- Start date
Benjamin Kenobi
Easy? You call that easy?
Are you sure it's connected properly? Receiver wires in the right way round (they can go in both ways unfortunately). How are you determining that no signal is getting through? I'm not familiar with the KK2 but is there a program to monitor the stick movements?
Actually i have the same problem, new kk2.1 connected correctly to my spektrum 6200, power up and go to reciever menu and says nothing connected. Im 100% sure the spektrum reciever is fine and i have connected servos via y lead to all reciever channels to prove it is sending a signal to the kk2.1 board but still reading no signal on all channels. Now what? How do i get it to work?