Continuous Motor Beeping

[BayAreaFlyer]

Hello,

I recently purchased a Turnigy nano-tech 4000mah 5S. I tried plugging it in to the Naza-m but all I get is continuous beeping from the motors. All of my 4 cell batteries work no problem. Any help is appreciated.

The motors are DJI 2212's

Battery: Turnigy nano-tech 4000mah 5S
Naza-M V4.02

Voltage showing on Naza Assistant is 20v

Calibrated voltage - no effect
Turned voltage monitor off/on - no effect

Thank you!

 

[PeteDee]

Do you have the throttle reversed from what it should be?

Pete

 

[BayAreaFlyer]

Nope, if I hook up a 4 cell there is no issue. Only happens when I hook up this 5 cell.

 

[SleepyC]

Are your ESC’s rated to go to 5S?
Most are 2 - 4 and then bigger ones like 40 - 80 amp can do 3S - 6S

 

[Tahoe Ed]

The Naza esc's and motors are not rated to 5S. The V2 PMU is and you should be able to calibrate Assistant voltage under the advanced tab. You don't give us much info on your set up. What version of the software/firmware are you using?