Mikrokopter Cinestar 8 settings
- Thread starter Tokaz
- Start date
ok 
Its all mk (mk forum part
Motors are rctiger 2814 770 kv. Have diffrent propps. apc 13x65, apc 14x47 and gemfan wood 13x45.
But i should start with 14x47.
The settings i look for is the settings for smooth flying.
Gyro P I D
acc comp dyn stab gps gain etc etc.
Really cant find anything.
Or if someone can share a link to some god info.
Fredde
Its all mk (mk forum part Motors are rctiger 2814 770 kv. Have diffrent propps. apc 13x65, apc 14x47 and gemfan wood 13x45.
But i should start with 14x47.
The settings i look for is the settings for smooth flying.
Gyro P I D
acc comp dyn stab gps gain etc etc.
Really cant find anything.
Or if someone can share a link to some god info.
Fredde
I use Standard settings and the kopter is flying
very well. Smooth flying depend on your flying skills.
If you like to tune your settings, change P I D values
during flight with potis. Every kopter react different,
when you change values. It depends on your setup,
weight etc.
You will get best results, when flying without helpers like
GPS and Altitude hold.
This will help. (only German)
http://www.mikrokopter.de/ucwiki/en/SettingsErfliegen?highlight=(Settings)|(erfliegen)
very well. Smooth flying depend on your flying skills.
If you like to tune your settings, change P I D values
during flight with potis. Every kopter react different,
when you change values. It depends on your setup,
weight etc.
You will get best results, when flying without helpers like
GPS and Altitude hold.
This will help. (only German)
http://www.mikrokopter.de/ucwiki/en/SettingsErfliegen?highlight=(Settings)|(erfliegen)