JustinTanny
Member
Professionally tuned multi rotor - heavy lift octocopter for sale, fly anything including RED EPIC
This is a custom original Cinestar converted into a heavy lifter. The machine and gimbal have been tuned for heavier payload weight (up to 10lbs of camera / lenses)
It will handle any camera up to a Red Epic, Scarlet (DSLR, 5D, FS700) with follow focus and matte box. I have spent a large amount of time tuning and perfecting this system, It has been extremely reliable and never been damaged. The reason I'm selling it is because It's a backup system I no longer need.
This Cinestar is less than a year old and has never been crashed or had a hard landing. It has always been flown professionally by a pilot with extensive years of experience. This machine is perfect for film or survey work and can carry Lidar cameras. This system is GPS equipped, It can be setup with auto pilot for waypoint flying and controlled through a laptop ground station.
Frame : Cinestar 8 Kit (original, not knockoff)
Gimbal: 3 axis Cinestar camera mount (with Radian gyro stabilization for each axis)
Flight Controller: DJI NAZA (Modes: GPS, Attitude, Manual, Autopilot)
Motors: 8x High Powered heavy lift motors.
Speed Controllers: 8x 60A ESC
Propellers: Xoar Beachwood 14x6
Price: $8299
Additional equipment below: Please email me for packages and pricing.
Autopilot Flying:
- DJI Data Link, Waypoint flying system.
Case:
- Travel Case (picture 4) Professionally made custom case - fits within dimensions for airline travel.
Brushless gimbals
- 3 Axis Cinestar Conversion with Alexmos Board
- DJI Zenmuse GH3
This is a custom original Cinestar converted into a heavy lifter. The machine and gimbal have been tuned for heavier payload weight (up to 10lbs of camera / lenses)
It will handle any camera up to a Red Epic, Scarlet (DSLR, 5D, FS700) with follow focus and matte box. I have spent a large amount of time tuning and perfecting this system, It has been extremely reliable and never been damaged. The reason I'm selling it is because It's a backup system I no longer need.
This Cinestar is less than a year old and has never been crashed or had a hard landing. It has always been flown professionally by a pilot with extensive years of experience. This machine is perfect for film or survey work and can carry Lidar cameras. This system is GPS equipped, It can be setup with auto pilot for waypoint flying and controlled through a laptop ground station.
Frame : Cinestar 8 Kit (original, not knockoff)
Gimbal: 3 axis Cinestar camera mount (with Radian gyro stabilization for each axis)
Flight Controller: DJI NAZA (Modes: GPS, Attitude, Manual, Autopilot)
Motors: 8x High Powered heavy lift motors.
Speed Controllers: 8x 60A ESC
Propellers: Xoar Beachwood 14x6
| Radio controllers | |||||||||||||||||||||||||||||||||||
| Main transmitter DX8 + Receiver | |||||||||||||||||||||||||||||||||||
| Camera Transmitter DX7 + Receiver | |||||||||||||||||||||||||||||||||||
Telemetry Module (Battery Data)
|
Price: $8299
Additional equipment below: Please email me for packages and pricing.
Autopilot Flying:
- DJI Data Link, Waypoint flying system.
Case:
- Travel Case (picture 4) Professionally made custom case - fits within dimensions for airline travel.
Brushless gimbals
- 3 Axis Cinestar Conversion with Alexmos Board
- DJI Zenmuse GH3
