charleshidalgo
I do things with stuff!
I have this as a 100% RTF package in another ad as well but I'm offering it as an ARTF deal here as well with a new lower price. I can adjust the price even more if the Taranis radio and monitor setup is not needed (subtract another 250). This amazing rig flies great and is rock solid.This has flown and hovered for 20 minutes at a time with a full load for testing by me and has just around 3 hours total on everything. The gimbal attaches and is removed (if needed) in a minute with four quick connect screws and two plugs for power and video. The Opale parachute is something I defiantly wanted on this big rig and is worth the price as far as I'm concerned. This rig out of the case and in the air sets up in a few minutes. The retractable landing work flawlessly. This is an amazing HD setup and the GH4 with it's DCI 4K 4096x2160 at 24p, and UHD 4K 3840x2160 at 30p/24p capabilities it was a no brainier. I feel this is the ultimate (for the price) in a heavy lift being compact (as far as these x8's are concerned) and quick to setup. It's configured to fly with a single operator but can be made a dual setup with simply adding another radio for the seconded person or go right back to a single immediately. This is ARTF as you need to add your camera and lens on arrival (though you will need to review all settings, learn the controls, and do a IMU and compass calibration) and everything else associated with first time usage.
I always support my sales after as much as possible (check my feedback) but all sales are final. I had to learn 99% of this hobby on my own with years of trial and error and hours of reading and bench testing and with technology changing daily a certain level of know how is required to operate these multirotors and I'm not responsible for what the buyer does on their end once the receive these items. I do promise things will show up as described.
The build component list:
CarbonCore Cortex X8 frame
8 T-Motor MN 4010-14 370kv
T-Motor carbon props v2 4x 15X5, 4x 16x5
8 Maytech 50A esc's
WOOKONG M with bluetooth, GPS V2 , IMU V2 (the new aluminum style case)
2x 5.8GZhz Video TX's (one for main camera and one for FPV cam )
1 fatshark FPV camera (with tilt control and OSD )
1 OPALE rescue parachute
iFLight bet view GIMBAL for GH4 (with zoom and focus option , and spectrum RX for gimbal control
Carboncore retractable landing gear
High amp power board , 5v bec ,12 v bec
Dji mini iOSD
4x 8000mah turnigy nanotech batteries (brand new)
Taranis plus radio tx with X8R rx for main controls and Spektrum module for gimbal control (all programmed for a single operated setup) full Yaw, Roll, Pitch, stop/start video, and shutter/photo control.
Liliput HD monitor with custom bracket for the Taranis
3,500.00 net to me and I will ship and insure it anywhere in the lower 48 USA for free. I have shipped to many foreign countries as well but that would not be free. Paypal verified buyers only please. This is cheaper than new if you price things out and then add the hours of labor to build it and you can see how things add up.
I always support my sales after as much as possible (check my feedback) but all sales are final. I had to learn 99% of this hobby on my own with years of trial and error and hours of reading and bench testing and with technology changing daily a certain level of know how is required to operate these multirotors and I'm not responsible for what the buyer does on their end once the receive these items. I do promise things will show up as described.
The build component list:
CarbonCore Cortex X8 frame
8 T-Motor MN 4010-14 370kv
T-Motor carbon props v2 4x 15X5, 4x 16x5
8 Maytech 50A esc's
WOOKONG M with bluetooth, GPS V2 , IMU V2 (the new aluminum style case)
2x 5.8GZhz Video TX's (one for main camera and one for FPV cam )
1 fatshark FPV camera (with tilt control and OSD )
1 OPALE rescue parachute
iFLight bet view GIMBAL for GH4 (with zoom and focus option , and spectrum RX for gimbal control
Carboncore retractable landing gear
High amp power board , 5v bec ,12 v bec
Dji mini iOSD
4x 8000mah turnigy nanotech batteries (brand new)
Taranis plus radio tx with X8R rx for main controls and Spektrum module for gimbal control (all programmed for a single operated setup) full Yaw, Roll, Pitch, stop/start video, and shutter/photo control.
Liliput HD monitor with custom bracket for the Taranis
3,500.00 net to me and I will ship and insure it anywhere in the lower 48 USA for free. I have shipped to many foreign countries as well but that would not be free. Paypal verified buyers only please. This is cheaper than new if you price things out and then add the hours of labor to build it and you can see how things add up.
