Mactadpole
Member
I have been using my CAMremote as an intervalometer with my GH2 for a long time now. I am now ready to hook it up to the FC so i can have it trigger at waypoints and with a switch. Below is a diagram of how I have it wired up but it is not triggering. I am using the setting Manual: RC receiver (CH0=Execute, CH1=Function) with Poti8 (channel 9) set to Output 2 and MX-20 channel 9 on switch 9. CH1 on CAMremote is not hooked up and according to the manual it should just let CH0 trigger the camera this way. I have an email into them but I am curious if anyone else has theirs setup this way or has some suggestions.
Thanks, Shawn
Thanks, Shawn
