plingboot
Member
Until now, i've not used the WKM built-in battery monitoring functions - relying instead on balance cable lipo monitors, but for various reasons want to use the WKM voltage monitor now.
Are the default values supplied by the assistant (23.10v - 0v = 23.1v and 22.20v - 0v = 22.2v) ok/safe to use or do i need to calculate my own values - if so could anyone assist me with working out the correct values to use in first and second level protection?
I'm using a single 6c 8000mAh pack.
I'm 'assuming' that once i've set this function up, if i fly to first level warning, take that time and deduct 20-25% i should have a 'safe' working time for my pack?
Are the default values supplied by the assistant (23.10v - 0v = 23.1v and 22.20v - 0v = 22.2v) ok/safe to use or do i need to calculate my own values - if so could anyone assist me with working out the correct values to use in first and second level protection?
I'm using a single 6c 8000mAh pack.
I'm 'assuming' that once i've set this function up, if i fly to first level warning, take that time and deduct 20-25% i should have a 'safe' working time for my pack?