550 flip the bottom board!

[sinaregg]

While assembling my second dji flame wheel 550 (I gave the first one to my son) I got the bright idea of flipping the bottom circuit board upside down. This makes for a clear platform for mounting whatever between decks. If you have to replace an ESC, the job is trivial. I used brush on electrical tape to insulate all the connections (available at home improvement stores).

 

[ksrimoungchanh]

that a good idea.. I normally use hot glue instead of the brush on electrical tape. How easy to remove if you needed to take the solder off?

KS

 

[Exopackshiu]

While assembling my second dji flame wheel 550 (I gave the first one to my son) I got the bright idea of flipping the bottom circuit board upside down. This makes for a clear platform for mounting whatever between decks. If you have to replace an ESC, the job is trivial. I used brush on electrical tape to insulate all the connections (available at home improvement stores).

In my case, it won't work because gimbal need to be mounted adding bolts nuts extra centre plate booms etc. personally i hate pinching wires

Shiu