12 or 13 inch props for Droidworx adx-3 HL ?

ZAxis

ZAxis

Member
We took the plunge and upgraded from a MK Hexa to a Droidworx adx-3HL. Thanks Geoff.
The motors are Quadcopters.co.uk Torxpower 3536 Pro and we're retaining the MK electronics.
Payload will be a Sony NEX-5 or Canon 500D on an AV130 gimbal.
What are the recommendations for suitable props ?

andy
 

A

AIRCONROB

Member
Wow, Isn't there anyone out there with an ADX-3 HL to guide on prop sizes, or it could just be a busy weeked everybody flying. I'm sure there's plenty good guy out there that will let you know Andy. If i can remember wright from RC group last year somebody had built a Y6 and noticed that they were using two different size props, I'm not sure what they were but if you had 11" and 12", then the 12" would be at the bottom and 11" on top. I might be wrong, Ill try to find the post and I'll let you know.

Rob
 

ZAxis

ZAxis

Member
I think there are plenty out there but they have already posted all the info I need. Search thru old postings has turned up a lot of useful info. At the moment I'm probably going for 13x6 top and bottom. I think the different size thing was never really proven and is impractical if you have to keep spares of two prop sizes.

Hexa Y frame all put together now. Nav lights fitted. Electronics on next. Wish it had been complete today as the weather was rather good for once.

andy
 


You must log in or register to reply here.
Top