Search results

Yes it is standart AV 130 v1 mount with savöx servos. I believe this effect is also visible if you don't fly. Just by moving the system in this video after in the later part you can see me walking on the ground striktly from left to right and back. https://vimeo.com/49667340 I will try to...

Let's hope today the weather will be fine ;) About the integral gains. They are 0 by default. furthermore from the manual I am not rotating the aircraft. Sure i will try some higher values than 0 but still i can't see how should affect my problem. I have written an pm to Brendan I hope he...

Pan is not used pos gain: Tilt - 150 roll - 600 velocity gain tilt - 80 roll - 20 integral gain all 0

Bringing back my roll issue. As said before http://www.multirotorforums.com/showthread.php?3304-Photohigher-skyline-rsgs&p=60928&viewfull=1#post60928 and http://www.multirotorforums.com/showthread.php?3304-Photohigher-skyline-rsgs&p=61142&viewfull=1#post61142 The Skyline shows is not...

This video is showing the move left or right effect. As long as i stand still the horizon is levelled. Even when pushing hard on the roll axis. Just for test purpose i used a roll gain from about 900. Too much ;) When moving left or right the horizon is wrong. http://vimeo.com/49667340

well that's the point. It works very well if you stand and shake the system. Like if you stand before a mirror . It works like we all expect. But at the moment you start to walk to the left or right. the horizon is no longer correct. the faster you move the more you can see it. Tried to upload...

finally i did a test fly. It seams like it is now much better than version 1.6. Though i must say there is bug if your move your kopter.... which happens quite often while flying ;) if you tilt and roll and the kopter doesn't move everything behaves like you expect. skyline rsgs 1.2.2 150 tilt...

it is version 1.1

I use the offical 1.2.2 Actually i modified what needs to be done for the loom and i made the dummy potis. The camera is mounted on a gel mount. But actually these normally makes thing even worse. 1.2.2 is light years better than 1.6. I even powered 1.6 with 3 power sources. Now everything is...

I have no problems with a 150 tilt gain and 700 gain on roll on a av130 with a Sony 730. I use also gel dampers for the cam. Firmware 1.2.2 and dummy pots.

the 1.2 version is beta. I don't have either. Could somebody please share it us ?

Yes I did. The firmware was installed sucessfully. Will try tomorrow again.

Whatever I do the skyline software crashes before I can alter any value. even in 1.3. In detail. I start up the skyline software. Press the connect button and crash. I can't change any value before. Or did I missed something. I tried to make serial connection with putty. This also did not...

Thanks for your input. Tried it like you suggested. Doesn't work sadly. Firware 1.6 get's istalled with spftware 1.3. When i try to connect to the skyline the app crashes again. Any other idea ?

Hi, i use version 1.7. Today after some auto tune it seams to me like the skyline has written wrong values into his settings. The skyline software crashes when i select the com port and starts to read/parse the config stored on the skyline. See below. I also tried to install firmwares 1.3, 1.6...

denny i don't have any clue why you have that much trouble. And it is not that worse on my side. It is not a plug and play solution for sure. Perhaps you expected too much. It is hobby for me right now. And from making a mk by hand optimize, do it again and so forth i really did expected this to...

the 3 Y loom really makes a big difference. Both for tilt and roll. Wanted to try the setup before flying. I power the skyline with 5 volt (scherrer uhf receiver - 5 volt recom). Tilt 6.5 volt Traco (should be replaced since only 1A), 6 volt 6a switched bec for roll. My sony 730 is mounted on...

Could somebody please share the 1.7 beta link with me (PM) Will go out for testing today. I must say it getting better and better. I did the H loom. I have no jitter on the roll only some on the tilt (130AV) The Sony 730 compensates a lot of the jitter. Way better than the mk stabi. This is a...

To upgrade you need to power the skyline after you started the upgrade. Regarding the The jitter. My setup is quite passiv damped. But has a good balanced camera setup. A bad positioned pivot can cause quite a jitter ;-)

I made the loom modification. The roll is quite good now. I pushed the sliders even to 50%. On tilt I use the third big scale. The tilt still jitters after the modification. But way better than before. This is way fast enough for a Sony 730. The cam compensates this with ease. Is must say...