Search results

Sorry it took so long to reply. Work has been crazzzzy! I have done a lot of mods to the PH gimbal to get it to where it is even usable. But to answer you questions... 1) You can change the servo gear with one of these. http://www.servocity.com/html/48_pitch_futaba_servo_gears.html I used 30...

The FreeFly Radians and FF360 servos on all 3 axis makes this mount almost tolerable. I also changed the gear ratio on all 3 axis to 5:1 (pan really needs this). I also replaced the tilt tray that the camera sits on as the aluminum foil version that comes with it is crap. One other thing that...

which version of navi is it? I had the the 1.1 navi and after about a year of fling I suddenly had had drifting, glitches and sometimes comm errors between the fc and navi. I finally replaced the navi with the 2.0 version and it flies better then ever. Later I also swamped the gps to the new(er)...

The carbon tubes that go through the grommets are 7mm and you want it to be a stiff connection here. I actually replaced the grommets with delrin bushings and replaced the 7mm carbon tubes with 9mm tubes to get rid of the flex.

Sorry to change the subject but can someone please tell me why most of the setting on the pan servo page are grayed out? I am using the 1.6 firmware. Thanks, John

Oh Bart one more thing. What props seem to work well on 4S? Would 13 x 6.5 sf be too much on a large Octo? I know weight plays a big roll in this but I am wanting to keep the rpm lower and noise down. Thanks, John

Thanks again Bart. I have 4 now but not had a chance to try them. I am thinking of ordering 4 more and stretching my octo. John

What do you guys think of these motors? Power and efficiency OK? What props have been used? I am planning on running them on 4s pack. I have run a couple on the bench and they seem to be well balanced. Thanks, John

Thanks everyone for the response. I have been sick for a few day so I have not not had a chance to follow up. Bart thanks for links I'll let you know how it works out when I get to feeling better. I am looking for independent gimbal gyro for a future 2 man operation. John

Hi Bart, I have a AV130 on a MK Octo. We need to video to be used in advertising. Thank you , John

Is there a camera gimbal stabilizer that actually works? I just wasted 3 days on the Skyline and I am sending it back. Thanks, John

Glad to help.

Watch this. http://www.youtube.com/watch?v=fDjpArwW5PA

Turn down the ATV's for the channel the switch is on and the blocks will turn blue. Try to center the travel for each side so as to get in the middle of where it starts to change blue and change back to gray.

I had some of the Plush controllers also but decided they were going to be too much trouble. I am using the Hobby Wing Flyfun 30 @ $20 each and they work great. http://www.hobbypartz.com/07e-flyfun-30a.html

You need to adjust the end points in your tx so the "A" and then the "M" turn blue when you toggle your switch.

Are you using Tunigy Plush ESC's? If you are they won't work without a firmware change.

If it continues to blink yellow I'll bet your fail safe settings are no correct. The box with the "A" and then the "M" should turn blue when you toggle your switch not the center where it says "Failsafe".

The problem with the magnetometer (compass) on the navi board is due to electromagnetic field not emi/rfi. This em field is usually caused by long and looped power leads feeding the esc's and battery. The best way to fight emf in our application is to not create them to start with. One way to do...

I would like to get a set from you also. Sending payment now. John