Search results

In this case, the same proverbe is valid for DJI. If they do not want to hear they have to feel. They will feel, if nowbody uses this product. Perhaps it takes some time, but then the image is lost.

I didn't want to hear so I had to feel. DJI Propeller 10 x 4.5 exploded on 12 m altitude while hoovering. The result a crash 3m beside me. F550 Frame,Motors, ESC's with FPV equippment, 2.1 kg, 12 hours since new. One experience is enoughe. Props and Motors changed to Graupner and AXI Problem...

On the DJI Motors is written: 3S/Props 1045 4S/Props 8045 Recommendation of the designer.

Hi kloner, Your explication seems to make sense. On ground the stabilisation algorithm can't work correct because disturbed and clear from ground it does the job. I'm verry interested how it works. At the moment to muchs wind for tests. By the way: In Europe 25 mW TX is allowed. :-(

Thank you kloner, Thats an Idea. I will test it. I'm aware off the "danger" because I started once and the switch was "wrong" and I had hard to work until the copter was on ground again with no damage.

Sorry, I forget to mention this item. Without camera, the center of gravity is in the center. With OptionPro Camera a little bit to the front. But not different in tilting. And sometimes (verry rare), I'am chocked then, he starts exacly vertical. Verry nice to see that, an so I try to finde the...

Thanks kloner, In the NAZA Tool everything is OK. Sticks in the center, no trim. Effect was to see from beginning. This needs more space when starting especially from my legs. Picture right with no power, left before takeoff (tilt direction camera.

At the beginning of the takeoff my F550 wants to flip backwards (15°). Just in the air it stabilize and hoover with sticks in center position. During the flight everything is OK. I assume that one of the ESC's is not calibrated well. The motors are already changed. Other brands of ESC's have...

DJI Hexacopter F550, 1850 gr. 3S 3600 mAh, 2400 mAh during 6 Min. hoovering are calculated 24 Ah. divided by 6 makes 4 Amps per Motor Absolutly no warming of the DJJ 30 A Escs. Same temperature as the frame. Temperatur of Akku estimated 40 Grad C.

Already problems with NAZA GPS Upgrad. After new registration, Installation of the new Assistant and Driver the Assistant could be started. But any reaction from the controller and transmitter sticks. No error message from the Assistant SW and Hardware (Driver) Under the menu "ABOUT" I can see...

I have just got my upgrade from http://shop.aerodron.ch/index.php/dji/naza-gps-upgrade.html Here some pictures. The unit in picture 1 weight 30 grammes.

Hi kikorafel, I can answer your question no 3 I have bothe in use. I recommend to by the NAZA. Because, perhaps later, with the NAZA GPS upgrade the NAZA control has exactly the same features as today WKM. WKM make sense only if you upgrade it with data link, view, waypoint wich are very...

Here is a german shop: http://stein-webshop.de/Shop/product_info.php?cPath=1114_1153&products_id=1152 Price: 149.00€ For germans the pound is too expensive. But when I wanted to order he told me that he will not suply to Switzerland because he had Problems with the Swiss customs.

The fixed interpupillary distance is realy a great problem. My glasses specialist told me my distance and sad it's important to see the full screen clear. I can't inderstand, that the goggles manufacturer ignore this fact. For example the Fatschark Dominator distance ist 63.5 mm and by distance...

I am Otto and I restarted RC again with 70 years with a Hexa. Allready 5 hours flight time without repair. Kind regards NAZA, DJI F550, Futaba T8FG

DJI Naza, Frame F550, Futaba T8FG

Hi Tom, Thank your verry much for the quicke answer. Really helpful.

Hello Tom, I have 2 questions. 1. On one of your pictures I have seen, that you connect the receiver with a lot of cables (24 wires)at the DJI unit. Why didn't you use the Futabe S-Bus? (3 wires) 2. On another picture is to see, that you have a separate camera for FPV. The gopro camera has an...

Das wichtigste bei Klebeverbindungen ist die absolute Fettfreiheit. Mit der Hand darüber wischen ist nicht gnügend, denn auch die Haut ist fettig. Auch ohne Sonnencreme. Vorher gut mit Aceton reinigen. Beim laminieren von CFK oder GFK wird Trennwachs eingerieben (fettig) damit die Teile nicht an...

Hi, verry interresting to hear that there is an other frequency for FPV than 2.4 or 5.8 GHz. Where did you by your ecquipment? Thanks, Otto