Search results

I dont think my partner has found the problem yet. I will find out today and ask about the GPS/ATTI limits. aaron, are you saying that the software was showing an incorrect setting? Did you over-shoot the targeted area needed to trigger the GPS mode? thnx

Maybe I'm not clear enough with my question? We have a lightbridge trying to supply the RC control and FPV for the pilot. The camera operator has a 2.4 radio with matching 2.4 transmitter for RC control of the gimbal…the camera op is using a 5.8 fpv setup to view the camera. The...

my partner updated and now the LB is stuck in failsafe? Was this caused by the update or is this a common occurrence?

We just updated everything and now the LB shows the rig in failsafe, however, the A2 software show in the correct mode. Anyone have any ideas? thnx

We had the pilot camera connected to the LB with the hdmi port and it worked fine with the two 2.4 radios. The hdmi port broke and now we are attempting to use the usb port for the pilot camera to view the video link with a tablet and thats when the problem started.

I Have a similar problem for a 2 person operation. We use a LB to pilot the craft and to view the pilot FPV camera. The gimbal is set up to be controlled by a 2.4 TX and to be viewed with a 5.8 fpv system. It worked when the pilot camera was being viewed with the HDMi port on the LB. Well...

Getting bad scrabbled video from the LB to an android tablet. All firmware is up to date. We are running a 2 operator setup which includes - two 2.4 radio TX, one 5.8 FPV system, one lightbridge system and the copter is using the A2 flight controller. The video appears to have interference...

subscribed.

I am having a difficult time trying to get a video TX to work with the iOSD MK2. The video TX was purchased at get fpv.com and has the word "Digital" branded on the side. The specs are - 800Mw 1.3 Ghz Transmitter. It requires 12v to power. Can the iOSD mk2 supply that? Or do I need to...

anyone know how to connect a 1.3ghz 800mW transmitter (purchased from getfpv.com) to the DJI iOSD mk2? I'm using the DJI ribbon cable and soldered the connections according to the wire diagram from the manual. Nothing....no video no telemetry...nothing. Wondering is the iOSD is pushing...