Search results

Have you tried just popping it off the ground for a real launch yet? Outside of course. The second part of the video looks like it may have proper balance. Unfortunately I am not familiar with the KK board. If you are confident it is set up correctly, perhaps it could be mismatched firmware...

Double check the ESC/motor combos are plugged into the correct channels of the KK board. Also make sure that the props are on the correct direction for the motor outputs/direction. Did you get the proper audio feedback from the individual ESC calibration?

+1. Just dealt with them for this exact upgrade. There was an issue with the XAircraft link since they updated the web site - and Dale at BuddyRC got it straight by dealing with them into the wee hours of the night. Make sure you ask for the new link when you purchase it.

I would restore all default settings and do the advanced calibration in assistant.

I'm no Andrew Carnegie, but I'll go out on a limb and say MONEY! Seriously folks, if you have the capital, the brand recognition in cameras and your company is being critiqued as a "one trick pony," I think it's safe to say this would be a no brainier. If a drone company like DJI can get...

There was no talk the other day when GoPro's CEO was interviewed on CNBC, but it looks like there is talk again of a GoOro drone.... https://www.cinema5d.com/gopro-drone-teased-by-ceo-nick-woodman-gopro-cloud-the-future/

Everyone knows that a constant state of prop wash acts just like a brushless gimbal :)

ALL videos of products like this are of interest. Keep 'em coming!

Nice! @Bartman has been working on some exciting 250 racer projects. Looking forward to seeing how you make out.

ATTI mode will eliminate any funky behavior by the GPS. Double and triple check your motors and props are spinning the correct direction. Happens to everyone at some point :)

Different tesla :)

I'm holding out for wireless charging :)

No, a very standard interview just defending against the Barons article. I was hoping for a little more info - but they had him pretty well cornered, so I suppose it was par for the course.

I like the look of it and the idea that it transforms. And obviously if you're going for jittery footage, its the perfect choice :) Seriously though, it's the high school kid that sees this thing and begins design on something that could really be different. That's what I look forward to.

Always intetested in a new take on drone design. This was is still in the design phase, but if he pulls it off, it will certainly be a different approach than the ones I've seen...

After looking at that link, I'm assuming that little bracket is gold? :)

+1. I should not have assumed - but make sure all ESCs are correct, as well as motors spinning proper direction and props on correct.

Have you tried taking off in ATTI mode? Have you plugged in the location of the GPS relative to the FC in the Naza assistant? I would check your center of gravity - because the battery looks like it would make it imbalanced. Also, how many cells in the battery?

It can be a bit much to deal with all at once. Get it working solid and then you can take advantage of all the features. The computer takes it to a whole new level.

Thanks!