Search results

Hello all, does anyone know how to get an activation code for the Mastor-G gimbal? I bought mine from Foxtech back in June and it did not have anything in the box regarding an activation code. I have emailed the serial number to both Bevrc and to Foxtech but have not heard back from them. Is...

Hello all, does anyone know how to get an activation code for the Mastor-G gimbal? I bought mine from Foxtech back in June and it did not have anything in the box regarding an activation code. I have emailed the serial number to both Bevrc and to Foxtech but have not heard back from them. Is...

I am using DYS 40 amp opto esc's on my bird. Is there a programming card that will work on these? Or is the radio the only way? Also the instructions are vary vague on any detail with these esc's so is there any videos on programming these as well? I would appreciate any insight into this matter.

I am building a Tarot FY680 using dys simonk flashed 40A BEC OPTO ESCs and a DJI NAZA V2 with GPS. I have some confusion as it was mentioned to me that I may have to remove the red wire from the connector on my signal wires from the NAZA controller to the ESC if it was not a DJI ESC. Can...

Yes science does run on fact. Keep up the good work and please keep us posted.

Can you post any video of that? That would be nice to see, but being on a military base I don't know if you can post the footage.

Yes I agree, we should make this our positive article thread. Please keep them coming. I see a lot of negative discussion around what people are doing wrong to give the multi rotor community a black eye such as the discussion around Black Sheep. Lets make this thread positive and post what...

Okay, thanks for the help. Carapau I will make use of that. Okay so here is another question, I would like to use a 22.2V 390KV motor, with the math and using six of them I should be able to get away with two 5000mah 6S 65C-130C and using 40amp SimonK flashed esc's. Does that sound correct?? The...

Ooops that should have been higher wattage.

Should I look for one with a higher mah rating?

Speaking of power supplies, will I need one of those to go along with a charger? I thought that they worked off of twelve volts such as a car battery?

It seems that there is an endless supply of different battery chargers out there. Can anyone recommend a brand that is good? Is balancing important? I was looking at some of Hobby King's chargers, should they be considered? My motors call for a 6S battery so I am assuming that I look for a...

I was wondering if anybody can give me an answer to this question. I have notice that some motors are advertising 16poles versus 22poles. Does that mean the number of magnets? If so are there advantages and/or disadvantages to more or less poles?

I have received this from a friend. http://venturebeat.com/2013/05/10/mounties-save-their-man-with-a-draganflyer-uav-drone-aircraft/

I am trying to carry about 2-3kg of payload. Would six 800KV motors possibly be enough? Does the KV rating also indicate power? Or is it just rpm per volt? Or is it related?

So in a nutshell that is what I am trying to do. Any help or suggestions would be greatly appreciated as I am always trying to learn. I am pretty excited about this build and can't wait to get started.

I am also torn between a few different chasis, I would like carbon fiber for its weight savings and its ability to absorb vibration and not have it carry through to the cameras. I am looking at the Tarot FY680, ST800 Carbon Fiber X-Copter 820mm, ATG X6 700mm Dual Arm Carbon Fiber Hexcopter...

I am starting to build a heavy lift 800mm hexa, I am also looking for longer flight times, hopefully 20 minutes or more. Could somebody let me know if a couple 6S would do the trick, also what would be a good motor size to go with, in KV? I am looking for good battery info and motor info to learn.