Search results

@Kloner, Thanks for all your insight. I know your the expert and your definitely know more about this then me, but that doesn't make me a moron. I've been flying single rotors for 3 years and flying the naza for 5 months so I am not looking for an automatic flying machine. I've seen it work in...

Ya Im certain it is not from warehouse light, the space is only lit with a few florescent tubes, and not very well I might add. And I read your other suggestions in other post when I was searching for an answer before I posted. tried all the re calibrations multiple times, no luck. At first I...

Hey Kloner, ya I saw your post about this. Dont have a picture now but I can tell you the NAZA sits dead center between the too plates. And these test flights were inside a warehouse so light on the barometer is not possible in this case. Altitude gain is at 130

So my alti mode seems to have stopped working on my f550. I re-calibrated the TX, Reset all the settings in the TX and still with no luck. I was flying inside so it was not a wind issue but the f550 seems to drop a few feet then continue to slowly lower itself. Tried adjusting some alti gains...

Im not sure I fallow. I you concerned with the amount its drawing off the lipo? I wanted something to match the Avroto motors but was slightly cheaper. Those are rated at 350. These specs also say standard prop size for this motor with 4s is 11x5.5.

I was thinking about it. I have an AG-550 gimble that I want to use with a 550D. I know under normal circumstances your wouldn't do 4s with 11" but given the added weight...?

Yup, your right. I never saw anything about the diameter of the prop adapter. I assumed the prop adapter was the same as the motor shaft but I see my misunderstanding now. Thanks for your response.

Hey just got some Sunny Sky motors, 2814 700kv, and I noticed that they appeared on the website to have 4mm motor shaft, but in reality they have a 6mm motor shaft. Anyone else experience this issue? I searched and found no one else has written of this...

Cool thanks for your reply. I use a dx7 so I don't have a knob on my to for gain adjustment. If I did I would have been able to mess with the gains on the fly. Instead I have to hook up to the NAza assistetent every time I need to tweek something

I have been running stock motors and gains for a while now and had no problems. I just upgraded to 11" props and sunny sky motors. My flame wheel seems unstable and twitchy. I assume it's a gain issue but haven't had a chance to mess with the gains. I was wondering if anyone had any insight on...

That was a great crash landing! Did you have visual on your quad when your video feed went down? Any use of the fail safe function?

Well I am happy to say I got it working. I don't know what it was but it just works like it should now. Calibrated and ready for test flight. Basically I took the whole thing apart and put it back together. I had read somewhere that on the AR8000 the brown servo wire is supposed to be facing up...

The VU led goes solid green when plugged in. The driver does show up under ports when the unit is plugged in. The Naza unit itself has a solid red light when powered on, that hasn't changed. All the other info is good to know for when I get it working past the calibration.

Hello, I have been trying to get the Naza assistant to work with my F450 for a few days now. I have done extensives online searching on forums and other sites to try and troubleshoot the problem. The problem is getting the assistant to respond to stick inputs from my transmitter to calibrate the...