Search results

24p mode works fine. For Red users, if you are shooting with 24fps, the brain LCD output should be on 50Hz or 60 Hz. If it's set on 24 Hz, Connex can not get the video feed.

Hello everyone, I have a bunch of MK stuff for sale. Very low hours. I upgraded to 6S system, so I'm not using these anymore. * 4 x MK Flight Controller 2.1ME. All upgraded with new AccZ sensor, so they are basically version 2.2. Very low flight times (all of them around 6-10 hours). No...

I hear a bearing noise, you should inspect the motors; you might wanna change the bearings.

Generally I'm happy with the result and the range.

You need enter the serial number of your unit here: http://connex.amimon.com/firmware-update Then you will download the application. You can only change settings on the air unit, not on the ground unit.

i couldnt understand the difference to be honest.

Carapau, Did you install the software and adjust the link parameter to "signal boost"? Before setting this, I was getting black-outs around 150-200 meters. But now, I have crystal clear downlink even at 400 meters.

Guys, I have tried almost every gimbal on the market, including DIY solutions based on Alexmos and Phobotic CPHV; Ronin, Gremsy H14 Plus and Movi's. For professional performance, nothing comes close to Movi in terms of performance, reliability, dependability. I bought Gremsy H14 Plus with a...

Movi has horizon drift issue as well. Once it has satellites, it can perform good; but when you are indoors or have poor gps coverage, you will probably see it on the footage; and sometimes it's just horrible. Freefly released a new antenna for better GPS coverage and therefore a better horizon...

Jakuban, Are you planning to build a gimbal for bigger cameras with Alexmox and encoders?

This problem exist on many users; on rcgroups you will find lots of X8 users are facing this problem. And this is also not related with A2, it also happens with MK FC.

5.8 GHz is not meant to fly behind obstacles like trees, buildings. Connex is no better than other solutions. For that purposes, you need to go lower frequencies.

5.8 GHz works best with LoS flights. When an obstacle comes between, it will loose signal very easily.

Fabien, "Range: there is an built in algorithm that calculates the distance (line of sight) between ground unit and air unit. At 1000 meter, signal is cutoff automatically for safety reasons." Can you please tell more about this safety feature. How come this is a safety feature?

Fabien, Are you using any other HD downlink system like Amimon's Skylink or Bolt Pro 2000? What's the range you get with stock antennas with this product? I use Skylink HD pro and I can't get over 150 meters range with stock antennas. (...

I'm located in Turkey and doing aerial business here. Currently, all drone operations are grounded in public locations. You can send me a PM for more details, I can guide you through this.

I have never been excited more than this when a camera released. Our productions will go to another level. Now, we are waiting for the details of Red Weapon, and announcements from Canon, Black Magic, Sony at NAB. Pretty exciting.

Lens choice is a bit limited. The biggest lens set that can be used on Red Epic on M5 is Zeiss Super Speed series. (except the 18mm). Other than this, most Canon EF lenses (16-35, 24mm, 14mm, 28mm, 35 mm) balance perfectly. Zeiss Distagon series also balance perfectly. You need to make Red...

Okay, I own M5 and M10 and what I can say about these: * You can use Red Epic with a light lens on M5. It works perfectly. We use C300 on M5 constantly. We don't have a single issue. * Without the cage upgrade, M10 performans worse than M5 for aerial filming. If you want M10 to perform as good...

BMCC4K produces very good results under controlled situations. Especiallay f you are on a set where the A camera is Alexa, BMCC 4K will be the choice for DP when they need to match the colors. Even 10-bit 4:2:2 prores is very very good for color grading. For more, it offers RAW which is much...